Apollo HVLP POWER-3 VS 7700QT Power Series Three Stage Turbine & Gun System

Description

Apollo Power-3 VS HVLP Turbine System with Atomizer 7700QT gun
Apollo's TrueHVLP New Power Series gives you more power, more performance and more value than ever before - Model POWER-3 VS has Variable Speed and provides 15% more power from a 3-Stage Turbine.
Apollo Model POWER-3 (which replaces Apollo's former 835) provides excellent results when spraying all solvent-based materials such as enamels, lacquers, stains, polyurethanes, most HVLP compatible waterborne coatings and more.
This 3-Stage HVLP Turbine is an extremely versatile unit and is widely used by woodworkers, boat builders and restorers; for automotive and airplane restoration and finishing; and any industry desiring super fine atomization with the widest range of materials.
The POWER-3 will yield a high quality finish and suits smaller-scale professional and home-based operations.
This turbine comes equipped with the Handi-Hold™ Spray Gun Docking Station, Apollo's newest innovation. Store, hold or transport your spray gun in a vertical position with no risk of knocking or falling over. Ready to spray when you are.
This unit is equipped with an internal air relief valve to accommodate a non-bleed style turbine spray gun.
Supplied with 24 foot (7.3 meter) flex air hose.
Specifications:
3 Stage
7.0 PSI (0.48 Bar)
115 CFM
Dual Air Filtration
HVLP Only - Single Spray Gun
110VAC - 60HZ
29 lbs
length: 15"
width: 8.5"
height: 12"
At Advanced Machinery you can choose from these POWER-3 Systems:
Turbine only without Hose or Spray Gun
Turbine with Apollo 5011 Quick-Release Cup Gun
Turbine with Apollo 5510 Quick-Release Cup Gun
Turbine with Apollo 5520 Touch-Up Gun
Turbine with Apollo 7700 Atomizer Gun with one quart pressure feed or various size gravity feed cups,
supplied on this listing with 1 qt pressure feed cup and 1.0mm needle as show above.
Available Tip & Needle Sizes for 7700 Gun:
0.8mm - Use with very thin materials such as stains
1.0mm -
(default size)
Use for fine touch up, heavier stains, thin lacquers
1.3mm - Use for most common clear and base coat finishes
1.5mm - Use for heavier bodied clear and base coat finishes, lighter primers
1.8mm - Use for heavy bodied clear finishes, light oil based paint finishes
2.0mm - Use for light primers, oil based finishes and thin latex finishes
2.5mm - Use for most latex coatings, heavy build primers and multi-color finishes
If you're ordering this system with the 7700 Atomizer gun and would like it supplied with a size other than 1.0 mm, or one of our gravity feed cups, or if you would like a gun other than the 7500 Atomizer gun offered in this listing, contact us at advmachinery.com.